The pyrolysis of propane

The pyrolysis of propane plays an important role in determining the combustion properties of natural gas mixtures and offers insight into the cracking patterns of larger fuels. This work investigates propane pyrolysis behind reflected shock waves with a multiwavelength laser-absorption speciation technique. Nine laser wavelengths, sensitive to key pyrolysis species, were used to measure absorbance time histories during the decomposition of 2% propane in argon between 1022 and 1467 K, 3.7-4.3 atm. Absorbance models were developed at each diagnostic wavelength to interrogate common initial conditions, and time histories of all major species are reported at 1250, 1290, 1330, 1370, and 1410 K. Nearly complete carbon recovery observed at lower temperatures enabled the inference of hydrogen formation from atomic conservation, while decaying carbon recovery at high temperatures suggests the formation of allene and 1-butene. The results show systematically faster pyrolysis than predicted by kinetic modeling and motivate further study into the kinetics of propane pyrolysis.     

Synthesis and Characterization of New Phosphorus Containing Sulfonated Polytriazoles for Proton Exchange Membrane Application

Sulfonated polytriazoles have drawn a great attention as high performance polymers and their good film forming ability. In the present study, a phosphorus containing new diazide monomer namely, bis-[4-(4′-aminophenoxy)phenyl]phenylphosphine was synthesized and accordingly, a series of phosphorus containing sulfonated polytriazoles (PTPBSH-XX) was synthesized by reacting equimolar amount of this diazide monomer (PAZ) in combination with another sulfonated diazide monomer (DSAZ) and a terminal bis-alkyne (BPALK) by the Cu (I) catalyzed azide–alkyne click polymerization. The polymers were characterized by nuclear magnetic resonance (¹H, ¹³C, ³¹P NMR) and Fourier transform infrared spectroscopic techniques. The sulfonic acid content of the copolymers also determined from the different integral values obtained from the ¹H NMR signals. The small-angle X-ray scattering results unfolded the well-separated dispersion of the hydrophilic and hydrophobic domains of the polymers. As a whole, the copolymer membranes displayed sufficient thermal, mechanical, and oxidative stabilities high with high proton conductivity and low water uptake that are essential for proton exchange membrane applications. The copolymers exhibited oxidative stability in the range of 15–24 h and had proton conductivity values were found as high as 38–110 mS cm⁻¹ at 80 °C in completely hydrated condition. Among the all copolytriazoles, PTPBSH-90 (BPALK:DSAZ:PAZ = 100:90:10) having IEC_W = 2.44 mequiv g⁻¹, showed proton conductivity as high as 119 mS cm⁻¹ at 90 °C with an activation energy of 10.40 kJ mol⁻¹ for the proton conduction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 263–279     

Activation of α-Fe2O3 for Photoelectrochemical Water Splitting Strongly Enhanced by Low Temperature Annealing in Low Oxygen Containing Ambient

Photoelectrochemical (PEC) water splitting is a promising method for the conversion of solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite (α-Fe₂O₃) is one of the most attractive materials for a highly efficient charge carrier generation and collection due to its large specific surface area and the short minority carrier diffusion length. In the present work, the PEC water splitting performance of nanostructured α-Fe₂O₃ is investigated which was prepared by anodization followed by annealing in a low oxygen ambient (0.03 % O₂ in Ar). It was found that low oxygen annealing can activate a significant PEC response of α-Fe₂O₃ even at a low temperature of 400 °C and provide an excellent PEC performance compared with classic air annealing. The photocurrent of the α-Fe₂O₃ annealed in the low oxygen at 1.5 V vs. RHE results as 0.5 mA cm⁻², being 20 times higher than that of annealing in air. The obtained results show that the α-Fe₂O₃ annealed in low oxygen contains beneficial defects and promotes the transport of holes; it can be attributed to the improvement of conductivity due to the introduction of suitable oxygen vacancies in the α-Fe₂O₃. Additionally, we demonstrate the photocurrent of α-Fe₂O₃ annealed in low oxygen ambient can be further enhanced by Zn-Co LDH, which is a co-catalyst of oxygen evolution reaction. This indicates low oxygen annealing generates a promising method to obtain an excellent PEC water splitting performance from α-Fe₂O₃ photoanodes.     

Enhanced Sensitivity to Local Dynamics in Peptides by Use of Temperature-Jump IR Spectroscopy and Isotope Labeling

Site-specific isotopic labeling of molecules is a widely used approach in IR spectroscopy to resolve local contributions to vibrational modes. The induced frequency shift of the corresponding IR band depends on the substituted masses, as well as on hydrogen bonding and vibrational coupling. The impact of these different factors was analyzed with a designed three-stranded β-sheet peptide and by use of selected ¹³C isotope substitutions at multiple positions in the peptide backbone. Single-strand labels give rise to isotopically shifted bands at different frequencies, depending on the specific sites; this demonstrates sensitivity to the local environment. Cross-strand double- and triple-labeled peptides exhibited two resolved bands that could be uniquely assigned to specific residues, the equilibrium IR spectra of which indicated only weak local-mode coupling. Temperature-jump IR laser spectroscopy was applied to monitor structural dynamics and revealed an impressive enhancement of the isotope sensitivity to both local positions and coupling between them, relative to that of equilibrium FTIR spectroscopy. Site-specific relaxation rates were altered upon the introduction of additional cross-strand isotopes. Likewise, the rates for the global β-sheet dynamics were affected in a manner dependent on the distinct relaxation behavior of the labeled oscillator. This study reveals that isotope labels provide not only local structural probes, but rather sense the dynamic complexity of the molecular environment.     

Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries

The structural changes of copper hexacyanoferrate (CuHCF), a Prussian blue analogue, which occur when used as a cathode in an aqueous Zn-ion battery, are investigated using electron microscopy techniques. The evolution of Zn_xCu_1−xHCF phases possessing wire and cubic morphologies from initial CuHCF nanoparticles are monitored after hundreds of cycles. Irreversible introduction of Zn ions to CuHCF is revealed locally using scanning transmission electron microscopy. A substitution mechanism is proposed to explain the increasing Zn content within the cathode material while simultaneously the Cu content is lowered during Zn-ion battery cycling. The present study demonstrates that the irreversible introduction of Zn ions is responsible for the decreasing Zn ion capacity of the CuHCF cathode in high electrolyte concentration.     

In Situ Structural Determination of a Homogeneous Ruthenium Racemization Catalyst and Its Activated Intermediates Using X-Ray Absorption Spectroscopy

The activation process of a known Ru-catalyst, dicarbonyl(pentaphenylcyclopentadienyl)ruthenium chloride, has been studied in detail using time resolved in situ X-ray absorption spectroscopy. The data provide bond lengths of the species involved in the process as well as information about bond formation and bond breaking. On addition of potassium tert-butoxide, the catalyst is activated and an alkoxide complex is formed. The catalyst activation proceeds via a key acyl intermediate, which gives rise to a complete structural change in the coordination environment around the Ru atom. The rate of activation for the different catalysts was found to be highly dependent on the electronic properties of the cyclopentadienyl ligand. During catalytic racemization of 1-phenylethanol a fast-dynamic equilibrium was observed.     

Re-Evaluation of a Fulvene-Based Self-Replicating Diels–Alder Reaction System

We re-evaluate our claim of a high diastereoselectivity in the self-relicating Diels–Alder reaction between maleimide 1 and fulvene 3 . It was shown that the system has a diastereoselectivity of 1.8:1 for NN-4 : NX-4 , which is contrary to the 16:1 ratio claimed by Dieckmann et al. The analysis of ¹H NMR monitoring of the reaction revealed that both replicators show sigmoidal growth which is typical for auto-catalytic systems.     

Experimental Evidence for the Incorporation of Two Metals at Equivalent Lattice Positions in Mixed-Metal Metal–Organic Frameworks

Metal–organic frameworks containing multiple metals distributed over crystallographically equivalent framework positions (mixed-metal MOFs) represent an interesting class of materials, since the close vicinity of isolated metal centers often gives rise to synergistic effects. However, appropriate characterization techniques for detailed investigations of these mixed-metal metal–organic framework materials, particularly addressing the distribution of metals within the lattice, are rarely available. The synthesis of mixed-metal FeCuBTC materials in direct syntheses proved to be difficult and only a thorough characterization using various techniques, like powder X-ray diffraction, X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy, unambiguously evidenced the formation of a mixed-metal FeCuBTC material with HKUST-1 structure, which contained bimetallic Fe−Cu paddlewheels as well as monometallic Cu−Cu and Fe−Fe units under optimized synthesis conditions. The in-depth characterization showed that other synthetic procedures led to impurities, which contained the majority of the applied iron and were impossible or difficult to identify using solely standard characterization techniques. Therefore, this study shows the necessity to characterize mixed-metal MOFs extensively to unambiguously prove the incorporation of both metals at the desired positions. The controlled positioning of metal centers in mixed-metal metal–organic framework materials and the thorough characterization thereof is particularly important to derive structure–property or structure–activity correlations.     

Electronic Finetuning of 8-Methoxy Psoralens by Palladium-Catalyzed Coupling: Acidochromicity and Solvatochromicity

Differently 5-substituted 8-methoxypsoralens can be synthesized by an efficient synthetic route with various cross-coupling methodologies, such as Suzuki, Sonogashira and Heck reaction. Compared to previously synthesized psoralens, thereby promising daylight absorbing compounds as potentially active agents against certain skin diseases can be readily accessed. Extensive investigations of all synthesized psoralen derivatives reveal fluorescence in the solid state as well as several distinctly emissive derivatives in solution. Donor-substituted psoralens exhibit remarkable photophysical properties, such as high fluorescence quantum yields and pronounced emission solvatochromicity and acidochromicity, which were scrutinized by Lippert–Mataga and Stern–Volmer plots. The results indicate that the compounds exceed the limit of visible light, a significant factor for potential applications as an active agent. In addition, (TD)DFT calculations were performed to elucidate the underlying electronic structure and to assign experimentally obtained data.     

Solid-State Dynamics and High-Pressure Studies of a Supramolecular Spiral Gear

The structures and solid-state dynamics of the supramolecular salts of the general formula [(12-crown-4)₂ ⋅ DABCOH₂](X)₂ (where DABCO=1,4-diazabicyclo[2.2.2]octane, X=BF₄, ClO₄) have been investigated as a function of temperature (from 100 to 360 K) and pressure (up to 3.4 GPa), through the combination of variable-temperature and variable-pressure XRD techniques and variable-temperature solid-state NMR spectroscopy. The two salts are isomorphous and crystallize in the enantiomeric space groups P3₂2₁ and P3₁2₁. All building blocks composing the supramolecular complex display dynamic processes at ambient temperature and pressure. It has been demonstrated that the motion of the crown ethers is maintained on lowering the temperature (down to 100 K) or on increasing the pressure (up to 1.5 GPa) thanks to the correlation between neighboring molecules, which mesh and rotate in a concerted manner similar to spiral gears. Above 1.55 GPa, a collapse-type transition to a lower-symmetry ordered structure, not attainable at a temperature of 100 K, takes place, proving, thus, that the pressure acts as the means to couple and decouple the gears. The relationship between temperature and pressure effects on molecular motion in the solid state has also been discussed.